camera MasterRig
Your DSLR or mirrorless, turned into a long-term cloud timelapse camera
MasterRig is a modular system around your camera. The MasterControl controller drives it over USB, keeps it powered and uploads every photo to the cloud; add the MasterCase outdoor case and solar power for the field. It arrives ready to use.
- check_circle Upload cloud en temps réel via 4G/5G ou WiFi
- check_circle Mode hors ligne — upload au retour de la connexion
- check_circle Surveillez et contrôlez à distance via le tableau de bord
- check_circle Capture JPEG + RAW
- check_circle Recovers by itself when the camera or the connection gets stuck
MasterControl — the controller
A standalone device that runs your camera: it takes the shots, uploads them to the cloud, watches over the site with its sensors and takes care of the camera's power.
Controls the shots
Drives your camera over USB and shoots on the schedule you set from the dashboard.
Uploads to the cloud
Every photo goes to the cloud in real time over 4G/5G or WiFi. Offline, it keeps the photos and uploads them when the connection is back.
Telemetry, sensors and alarms
Sends its status and sensor readings to the dashboard and alerts you when something needs attention, such as fogging glass.
Saves energy on solar
On solar-powered sites it switches the camera off between shots, so the battery lasts longer.
Restarts the camera by itself
If the camera freezes, MasterControl power-cycles it. No site trip for a reboot.
MasterCase — the outdoor case
Built to stay outdoors for months or years: rain, sun, night, construction sites. Nylon PA12 printed with MJF, dyed black and bead-blasted, with the finish of an industrial product rather than a hobby 3D print.
Glass window
A glass window in front of the lens.
Anti-condensation vent
Equalises the pressure, so the case breathes without letting water in.
Sun hood
Reduces the heat of the sun on the case and reflections on the glass.
Fogging alert
A temperature and humidity sensor in MasterControl computes the dew point and warns you before the glass fogs up.
Arca-Swiss quick release inside
The camera slides in and locks in a few seconds, no tools needed.
Rear door, 3 lever latches
Opens quickly and gives full access to camera and controller.
Mounts on any side
Two screws move the 1-inch ball to whichever side you need.
RAM / 1-inch ball compatible
Mounts on super clamps, ball heads, poles, cranes and scaffolding.
Accessory shoe on top
For the accessories your project needs.
Controller in the door
MasterControl sits inside the door: it drives the camera over USB, shoots and uploads in real time. With the door open you see its screen from the inside.
Adapt as conditions change
Light and seasons change: adjust format (JPEG or RAW+JPEG), ISO, exposure compensation, white balance, aperture and shutter speed remotely to keep every frame consistent.
RAW+JPEG from the Pro plan
Compatible cameras
Over 200 camera models are in our compatibility catalog: Canon, Nikon, Sony, Fujifilm and more. Tell us yours and we confirm it works before you order.
photo_camera Reflex / Hybrides
Connecté via USB-OTG au contrôleur Android
expand_more
Reflex / Hybrides
Connecté via USB-OTG au contrôleur Android
Votre appareil n'est pas listé ou est marqué « à tester » ? Nous pouvons ajouter sa prise en charge. Contactez-nous sur WhatsApp
| Marque | Famille d'Appareils | Connexion | Statut |
|---|---|---|---|
| Canon | EOS DSLR (xxxxD series) Tested: 1300D Models: 1000D, 1100D, 1200D, 1300D, 1500D, 2000D, 3000D, 4000D | USB | check_circle Fonctionnel |
| Canon | EOS DSLR (5D/6D series) Tested: 5D Mark II Models: 5D/II/III/IV, 5DS, 5DS R, 6D, 6D II | USB | check_circle Fonctionnel |
| Canon | EOS Mirrorless (R series) Tested: EOS R, R6 Mark III Models: R, RP, R3, R5, R6/II/III, R7, R8, R10, R50, R100, R1 | USB | check_circle Fonctionnel |
| Canon | EOS Mirrorless (M series) Models: M, M2, M3, M5, M6/II, M10, M50/II, M100, M200 | USB | help À tester |
| Canon | EOS DSLR (xxD series) Models: 10D–90D, 77D | USB | help À tester |
| Canon | EOS DSLR (1D/1DX series) Models: 1D/II/III/IV, 1Ds/II/III, 1DX/II/III | USB | help À tester |
| Nikon | DSLR (D3300 and newer) Models: D3300–D3500, D5100–D5600, D7000–D7500, D500, D600–D780, D800–D850, Df | USB | help À tester |
| Nikon | Z Mirrorless Models: Z5, Z6/II/III, Z7/II, Z8, Z9, Z30, Z50/II, Zfc, Zf | USB | help À tester |
| Fujifilm | X / GFX (with remote capture) Models: X-T1–X-T5, X-Pro2/3, X-E3, X-H1/H2, GFX 50S/50R/100/100S/100 II | USB | help À tester |
| Panasonic | Lumix S (L-Mount) Tested: S1M2 Models: S1, S1M2, S1R, S1H, S5, S5II, S5IIX, S9 | USB | check_circle Fonctionnel |
| Sony | Alpha (A5000–A7IV, A9) Models: A5000, A5100, A6000–A6700, A7/II/III/IV, A7R/II/III, A7S/II, A7C, A9 | USB | help À tester |
Check your camera
Tell us which camera you use: we confirm it works with MasterRig before you order.
Modules and prices
Start with the controller, add what your site needs.
MasterControl
The controller: takes the shots, uploads them to the cloud, monitors the site with sensors and alarms, and power-cycles the camera when it freezes.
350 € Required
MasterCase
The outdoor case for camera and controller, built to stay out for months or years.
350 €
Solar power
Solar panel, charge controller and 12 V LiFePO4 battery, for sites without mains power.
350 €
Prices are one-time purchases, VAT excluded. Storage and dashboard come with a cloud plan, the same for every MasterLapse product. See cloud plans